-
-
-
-
-
Service
Storage-Type Eyewash Station + Shower Room
Category:
- Product Description
-
- Commodity name: Storage-Type Eyewash Station + Shower Room
This equipment integrates a standard emergency shower system with a standalone water storage tank and can be installed at work sites where chemicals are used.
The Emergency Eyewash and Shower with Safety Tank and Room is a floor-mounted, fixed emergency eyewash and shower unit equipped with an integrated water storage system. This equipment combines a standard emergency shower system with a standalone water storage tank, making it suitable for installation at work sites where chemicals are used. In the event of chemical splashes to the eyes, face, or body, users can activate the corresponding unit to initiate rinsing. The built-in water storage tank provides a backup water supply of no less than 1,200 liters for both the shower (flow rate of 85–90 liters per minute) and eyewash (flow rate of 12–15 liters per minute) functions when the external water supply is unstable or interrupted, ensuring continuous flushing for more than 15 minutes—thus meeting the requirements of emergency safety standards.
Product Advantages:
- Independent Water Supply Assurance: A stainless steel water storage tank made of SS304, with a capacity of no less than 1,200 liters, is provided to supply emergency flushing water in the event of an external water supply failure.
- Stable flushing performance: The water supply flow rate of the spray and eyewash units complies with standards, ensuring that the flushing effectiveness meets emergency response requirements.
- Weather- and Corrosion-Resistant Materials: The primary wetted components and storage tanks are fabricated from SS304 stainless steel, while the frame and side panels can be configured in either carbon steel or SS304, ensuring suitability for industrial environments.
- Cold-Environment Adaptability: Optionally equipped with an electric trace heating system (220 VAC/230 VAC) and a temperature-control unit rated Exd IIC T6 and IP66, to prevent pipeline freezing in low-temperature conditions.
- Standard interface design: the inlet features a 1-1/2" RF flange, and the outlet is a 1-1/2" FNPT, facilitating system connection and installation.
Product Applications
- Remote or water-supply-unsustainable work areas: Applicable to chemical handling facilities located far from a stable water source or experiencing insufficient water pressure.
- Outdoor installation in cold regions: Equipped with electric heat tracing and explosion-proof electrical components, suitable for outdoor or semi-outdoor areas where ambient temperatures can drop as low as -40°C.
- High-risk chemical handling areas: installed near workstations in chemical plants, laboratories, electroplating workshops, and other facilities where chemical leaks or splashes may occur.
- Facilities requiring strict safety standards: Suitable for enterprises in industries such as pharmaceuticals and petrochemicals that have continuous water supply and explosion-proof requirements for emergency equipment.
Technical Specifications
Project Parameters Ambient temperature -40~38℃ Operating temperature 22~38°C Inlet size 1-1/2" RF FLANGE ASME B16.5 CL150# Air Emission Outlet Size 1/2" FNPT Drain opening size 1/2" FNPT Outlet size Min 2" FNPT Operating pressure 0.2~0.4 MPa Irrigation fluid Drinking tap water Spray flow rate 85–90 L/min Eye/face wash flow 12–15 L/min Rinsing time >15 MIN Bill of Materials
Component Material and Specifications Sprinkler Head (S3) SS304 Eye-washing elbow (E2) SS304 Eye Wash Station (B2) SS304 Spray ball valve SS304, Size: 1" Eyeball wash valve SS304, Size: 1/2" Pipeline SS304 Materials for water storage tanks SS304 Volume of the water storage tank Min 1200L Frame material CS + Paint (Option: SS304) Side panel material CS + Paint (Option: SS304) Spray Booth Materials CS + Paint (Option: SS304) Electrical Instrument Technical Parameters
Project Parameters Voltage of electric heat tracing cable 220VAC/230VAC Power connector size and type M25×1.5, SS304 standard gland (for electric heat tracing power supply) Explosion-proof and protection ratings of junction boxes and thermostats Exd IIC T6, IP66 Explosion-proof and Ingress Protection Ratings of Electric Heat Tracing Cables Exe IIC T6, IP66 Power of the electric heat tracing cable 2000~3000W Static grounding to the conductor post M10 Explosion-proof and protection ratings for sound-and-light alarms, indicator lights, and limit switches (optional) Exd IIC T6, IP66 Operating Instructions
Function Operating Method Spraying Hand in hand Eye wash / Face wash Push by hand Package Dimensions and Weight
Project Parameters Packaging and dimensions (two units per package) Palletized packaging, length × width × height = 2150×1000×2750 mm Weight (2 units per package) 600KG
Product Standards Developed with STG’s Participation
GB 38144-2025
Eye and face protection—Emergency shower and eyewash equipment
SH/T3205-2019
Design specification for emergency shower and eyewash system in petrochemical industry
GB/T 17888.1/2/3/4-2020
Safety of machinery—Permanent means of access to machinery
GB 4053-2025
Safety requirements for fixed metal ladders and platforms
Keywords:
Next
Product Inquiry
We will contact you within one business day. Please check your email.
Yancheng STG Safety Equipment Co., Ltd.
Hotline
No. 89 Shufeng Road, Dongtai Town Industrial Park, Dongtai, Yancheng, Jiangsu, China
Mobile website QR code